FUJIFILM FDR ES
DR solutions designed with the essential conveniences of FUJIFILM image acquisition and design
DR solutions designed with the essential conveniences of FUJIFILM image acquisition and design
Fujifilm’s ISS method provides ultra-sharp imaging with advanced dose efficiency. The design captures the x-ray image from the patient/incident side of the detector. Traditional detector designs capture the image from below the scintillator layer.
This new design allows images to be captured where it is sharper and stronger. The result is an ultra-high-definition image as it was always intended.
These lightweight, small format 10 x 12 in (24 x 30 cm) detectors ideal for extremity imaging positioned outside of the bucky.
These lightweight, cassette-sized 14 x 17 in (35 x 43 cm) detectors are available with a detachable cord and the option of going wireless for added positioning versatility.
These full-sized 17 x 17 in (43 x 43 cm) detectors are available with a detachable cord and an option to go wireless, making them ideal for dedicated use in an upright bucky or in-table solution.
These lightweight, cassette-sized 14 x 17 in (35 x 43 cm) detectors are available with a detachable cord and the option of going wireless for added positioning versatility.
These full-sized 17 x 17 in (43 x 43 cm) detectors are available with a detachable cord and an option to go wireless, making them ideal for dedicated use in an upright Bucky or in-table solution.
The FDR ES series offers rounded corners to all detectors making them easier to pick up off of flat surfaces
Carbon fiber casing making the detectors durable and lightweights
Sleep mode extends battery life resulting in batteries being changed less frequent than previous models
IPX-3 Rating
ISS Technology
The DR QC Phantom allows comprehensive quality assurance testing for DR Detectors and associated software. The phantom enables seven quality assurance assessments for monthly and semi-annual evaluation, including exposure linearity and sensitivity, high and low contrast reproducibility, artifact and residual image detection, image resolution, collimator beam alignment, measurement tool accuracy, and display jitter QA testing.
Detectors
Detectors | C24 | C35 | C43 | G35 | G43 |
---|---|---|---|---|---|
Detector Size | 10 X 12 in (24 x 30 cm) | 14 x 17 in (35 x 43 cm) | 17 x 17 in (43 x 43 cm) | 14 x 17 in (35 x 43 cm) | 17 x 17 in (43 x 43 cm) |
Scintillator | Cesium Iodide (CsI) | Cesium Iodide (CsI) | Cesium Iodide (CsI) | Gadolinium Oxysulfide | Gadolinium Oxysulfide |
Connection Type | Tethered / Wireless | Tethered / Wireless | Tethered / Wireless | Tethered / Wireless | Tethered / Wireless |
Pixel Matrix | 1536 x 1920 | 2836 x 2836 | 2836 x 2832 | 2836 x 2336 | 2836 x 2832 |
Pixel Pitch | 150 μm | 150 μm | 150 μm | 150 μm | 150 μm |
Dimensions | 13 x 10.6 x 0.6 in | 15 x 18 x 0.59 in | 18 x 18 x 0.59 in | 15 x 18 x 0.59 in | 18 x 18 x 0.59 in |
Weight | 3.5 lbs | 6.4 lbs | 8.2 lbs | 6.4 lbs | 8.2 lbs |
Image Display | 1 – 2 seconds | 1 – 2 second | 1 – 2 seconds | 1 – 2 seconds | 1 – 2 seconds |
Cycle Time | Less than 9 seconds | Less than 10.5 seconds | Less than 13 seconds | Less than 10.5 seconds | Less than 13 seconds |